Welcome to TUNAP France For trade customers only
937 Injector Intensive Cleaner - microflex® 937 - 8
937 Injector Intensive Cleaner - microflex® 937 - 1
937 Injector Intensive Cleaner - microflex® 937 - 2

937 Injector Intensive Cleaner

Special intensive cleaning agent with ROA² technology for fuel injection systems in petrol engines. Also removes deposits on injectors that cannot be removed using cleaners added to the fuel tank.

Art.-no. 1100510
EAN 4002325993742
All versions

Prices for customers after login
937 Injector Intensive Cleaner

Art.-no. 1100510

Prices for customers after login
Quantity
UN
x 1

Exclusively for trade customers

Register now and access more than 400 products

Hazardous Material

ROA² technology


  • Even more powerful cleaning formula based on ROA² technology

  • Deposits on injectors are broken down and cleaned away

  • Ensures a consistent injection spray, smooth idling, reduced fuel consumption and lower emissions

  • ROA² level 3: The cleaning action is powerful enough to remove contamination that has accumulated over as many as 80,000 kilometres


    • Properties


  • Enables the injectors to be cleaned directly

  • The injectors do not need to be removed before use

  • Breaks down and removes resin residues and deposits

  • Excellent cleaning performance around the inlet valve of aspirated engines

  • Ensures an even injection spray, smooth idling and reduced fuel consumption

  • Reduces emission values compared to when the system is not clean


    • Application area


  • For cleaning petrol injection systems

  • In cases of poor fuel quality

  • In cases of malfunctioning, e.g. rough idling

  • In cases of excessive fuel consumption

  • Prior to all adjustment work and emissions tests

  • In cases of poor engine performance

  • For fuel injection system faults caused by contamination

  • For fuel-related contamination in high-pressure pumps


    • Instructions


    Special tool TUNAP 13310 ICM 2020 must be used to allow the system to be cleaned without dismantling the injectors. Refer to the operating instructions before use.



    Dosing


    For one passenger vehicle (up to 4 cylinders), 1 can of 937 Injector Intensive Cleaning is required. 6 cylinder and 8 cylinder engines require 2 cans. 10-12 cylinder engines require 3 cans.



    Notice


  • Only use 937 injector intensive cleaner for petrol engines with the ICM 2020.

  • Regularly using 974 injector direct protection for petrol engines after cleaning also protects against recontamination

    • Product Description

    Injector Intensive Cleaner

    Contents

    500 ml

    Shelf life

    730 d

    Product information

    Datasheets (0)

    Certificates/ Documents (2)

    User manual

    Product Information

    Required accessory:
     
    Product
    Description
    Quantity
    UN
    Price
    /UN
    13310 Injecto Clean Machine
    13310 Injecto Clean Machine

    TUNAP 13310

    x 1
    The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

    Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
    The article number is made up of the following: VVVVAAABBB
    VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
    AAA = 3 digits for dimension part 1
    BBB = 3 digits for dimension part 2

    Example article number structures:
    Example 1: Screw with dimensions of 4x10 mm:
    VVVVAAABBB
    00574 10 (2 spaces between the 4 and the 10)

    Example 2: Screw with dimensions of 10x20 mm:
    VVVVAAABBB
    005710 20 (1 space between the 10 and the 20)

    Example 3: Flat washer with an internal diameter of 6 mm:
    VVVVAAABBB
    04076
    Price per packaging unit (PU):
    The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

    Price with price key representation (PSL):
    The price always applies to a quantity ruled through the price key:
    Price for 1 unit
    Price for 100 units
    Price for 1000 units
    The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
    In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
    Additive article:
     
    Product
    Description
    Quantity
    UN
    Price
    /UN
    978 Combustion Chamber Cleaner
    978 Combustion Chamber Cleaner

    microflex® 978

    x 1
    989 Injector Direct Cleaner
    989 Injector Direct Cleaner

    microflex® 989

    ROA² technology: The cleaning formula for engine efficiency and improved performance
    Deposits on injectors are broken down and cleaned away
    Excellent dissolution properties in all (bio-)diesel mixtures
    ROA² level 2: Ideal for heavy contamination
    x 1
    979 Injector Direct Cleaner
    979 Injector Direct Cleaner

    microflex® 979

    ROA² technology
    Even more powerful cleaning formula based on ROA² technology
    Deposits on injectors are broken down and cleaned away
    Re-contamination is prevented
    Excellent dissolution properties in all petrol mixtures
    ROA² level 2: Ideal for heavy contamination
    x 1
    The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

    Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
    The article number is made up of the following: VVVVAAABBB
    VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
    AAA = 3 digits for dimension part 1
    BBB = 3 digits for dimension part 2

    Example article number structures:
    Example 1: Screw with dimensions of 4x10 mm:
    VVVVAAABBB
    00574 10 (2 spaces between the 4 and the 10)

    Example 2: Screw with dimensions of 10x20 mm:
    VVVVAAABBB
    005710 20 (1 space between the 10 and the 20)

    Example 3: Flat washer with an internal diameter of 6 mm:
    VVVVAAABBB
    04076
    Price per packaging unit (PU):
    The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

    Price with price key representation (PSL):
    The price always applies to a quantity ruled through the price key:
    Price for 1 unit
    Price for 100 units
    Price for 1000 units
    The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
    In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

    Art.-no.
    Cust. Mat. No.

    Hazardous Material

    Product information

    TUNAP France Catalogue

    Datasheets()

    Datasheets ()

    CAD data  | 

    Certificates/ Documents

     | 

     | 

    Technical information
    Show all product details